Description:Lockheed Martin Missiles and Fire Control team is looking for a NC Machine Operator Sr. to join the Archbald, PA team.  Responsible for set up and operation of one or more computer numerical controlled machining centers for both horizontal and vertical machines. Performs such operations
JSfirm
NC Machine Operator Sr
Job Description:

Description:Lockheed Martin Missiles and Fire Control team is looking for a NC Machine Operator Sr. to join the Archbald, PA team.

 Responsible for set up and operation of one or more computer numerical controlled machining centers for both horizontal and vertical machines. Performs such operations as drilling, milling, boring, & tapping, etc. on any and all types of work within the scope of the machine
 Follows instructions to machine, fabricate, or assemble parts to print and operation sheet specifications using conventional, CNC, and sheet metal machines including saws, riveters, fasteners, setters, presses, spot welders, and hand tools including grinders, Helicoil installation tools, etc.
 Interprets CAD data, prints and sketches with regard to fabrication and can follow written and/or verbal instructions
 Sets up CNC machines per blueprints or customer requirements
 Verifies NC code during execution of setup
 Pre-sets and installs proper cutting tools select proper speeds, feeds, and depth of cut where applicable to maintain the proper quantity and quality standards
 Edits CNC programs
 Performs secondary operations during the machine cycle such as deburring and straightening
 Selects and installs proper cutting tools, and zeroes in the machine to control. Shapes and installs proper cutting tools select proper tool offsets to meet quality standards and make other necessary setup adjustments
 Selects and loads proper CNC program in machine control to insure proper operation of the machine
 Inspects parts as they are produced using standard gages, micrometers, indicators, vernier calipers, depth gages, and other measuring devices, to ensure conformity to specifications
 Inspects cutting tools for wear to ensure the quality of parts, reports worn tools to the supervisor or set up person, and makes adjustments during production run as required to maintain quality parts and to keep the machine running
 Maintains coolant levels to ensure a steady supply of coolant/cutting fluids to the machine
 Maintains workstation/cell in organized manner and in compliance with any applicable safety standards
 Receives and, when assigned, provides cross-training for other tasks related to department functions and procedures
 Recommends and implements changes to achieve process improvements and/or cycle time reductions
 Performs minor preventive maintenance to equipment
 Works in time-critical situations in a dynamic, team-oriented environment where programs, setups, and tooling are constantly changing and interact effectively with associates & management as priorities shift
 Performs other job-related duties as required by management
 Physical condition allowing:
a. Lifting 50 pounds
b. Standing, sitting, bending, walking, 10+ hours per day
c. Personal protective equipment including Steel-toed shoes, safety glasses, hearing protection, and wearing a respirator when required
 Inspects set up parts prior to submission to inspection for approval to the fullest and most practical extent possible
 Assists in providing feedback on prescribed processes, fixturing, and tooling to Manufacturing Engineers to ensure that off-line engineering is complete and optimize efficiency before online operations are performed
 Analyzes machining results and performance targets with budgeted times and communicates shift targets for jobs to be run in production
 Investigates “out of specification” problems in machining processes and work with ME’s and programmers to resolve such issues
 Provides technical support to Manufacturing personnel when necessary
 Verifies gages and inspection equipment required are correct and appropriate for the task
 Adheres to safety guidelines and the correct procedures for performing tasks to prevent personal injury or damage to product and/or equipment
 Must be able to support a flexible work schedule supporting overtime, off-Fridays, weekends,
and/or alternate shifts to support product schedules as required
Basic Qualifications:
 5 years, or equivalent experience/combined education, with additional specialized training in specific aspects of job functions and with demonstrated ability to meet production time standards with minimal defects
 Proficient in use of Measuring Equipment and able to verify conformance of machined work
piece to specifications
 Proficient in reading and understanding complex mechanical blueprints
 Experience in shaping and installing proper cutting tools and selecting proper tool offsets to meet quality standards and make other necessary setup adjustments
 Must know M & G code to be able to program, edit & trouble shoot CNC program at machine
Desired Skills:
 Experience as CNC operator in multiple machine cellular manufacturing operation
 Proficient at Geometric Dimensioning & Tolerancing (GD&T)
 Experience in the development of, or redesign of, tooling and fixtures to improve quality or reduce costs
 Excellent knowledge of tooling and cutting condition calculations; know proper use and selection of different inserts, cutting tools and cutting tool geometries
 Excellent knowledge and application of GD&T
 Experience programming with GibbsCAM
 Experience with Solid Modeling
 Ability to perform complex calculations related to machining
 Knowledge of such tools as SAP, Command Media, Apriso, PAL, dPLM, Apriso, Microsoft Office
 Demonstrated experience in mentoring/teaching of junior machinists
 Good oral and written communication skills
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.

As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Experience Level: Hourly/Non-Exempt
Business Unit: MISSILES AND FIRE CONTROL
Relocation Available: No
Career Area: Manufacturing
Type: Full-Time
Shift: First

 Experience as CNC operator in multiple machine cellular manufacturing operation
 Proficient at Geometric Dimensioning & Tolerancing (GD&T)
 Experience in the development of, or redesign of, tooling and fixtures to improve quality or reduce costs
 Excellent knowledge of tooling and cutting condition calculations; know proper use and selection of different inserts, cutting tools and cutting tool geometries
 Excellent knowledge and application of GD&T
 Experience programming with GibbsCAM
 Experience with Solid Modeling
 Ability to perform complex calculations related to machining
 Knowledge of such tools as SAP, Command Media, Apriso, PAL, dPLM, Apriso, Microsoft Office
 Demonstrated experience in mentoring/teaching of junior machinists
 Good oral and written communication skills
Company Details
Lockheed Martin
6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/
1731 Open Jobs Available
Lockheed Martin Corporation is an American global aerospace, defense, security and advanced technologies company with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It is headquartered in North...

Benefits:
TBD
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)
Job Info
Location
Archbald, Pennsylvania, United States
Type
Permanent
Company Details
Lockheed Martin
6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/
1731 Open Jobs Available
Lockheed Martin Corporation is an American global aerospace, defense, security and advanced technologies company with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It is headquartered in North...

Benefits:
TBD

JSfirm, LLC

Roanoke, TX

jobs@jsfirm.com

JSfirm LLC, Privacy Policy

All rights reserved. 2001-2024 JSfirm