NC Machine Operator 2nd Shift

Job Description:

Description:We are seeking an NC Machine Operator to support our team. Your responsibilities will include, but are not limited to:
• Follow instructions to machine, fabricate, or assemble parts to print and operation sheet specifications using conventional, CNC, and sheet metal machines including saws, riveters, fasteners, setters, presses, spot welders, and hand tools including grinders, Helicoil installation tools, etc.
• Interpret CAD data, prints and sketches with regard to fabrication and follow written/verbal instructions
• Perform secondary operations during the machine cycle such as deburring and straightening
• Inspect parts as they are produced using standard gages, micrometers, indicators, vernier calipers, depth gages, and other measuring devices, to ensure conformity to specifications
• Inspect cutting tools for wear to ensure the quality of parts, reports worn tools to the supervisor or set up person, and make adjustments during production run as required to maintain quality parts and to keep the machine running
• Maintain coolant levels to ensure a steady supply of coolant/cutting fluids to the machine
• Maintain workstation/cell in organized manner and in compliance with any applicable safety standards
• Receive and, when assigned, provide cross-training for other tasks related to department functions and procedures
• Recommend and execute changes to achieve process improvements and/or cycle time reductions
• Perform minor preventive maintenance to equipment
• Work in time-critical situations in a dynamic, team-oriented environment where programs, setups, and tooling are constantly changing and interact effectively with associates & management as priorities shift
• Perform other job-related duties as required by stakeholders
• Physical condition allowing: lifting 50 pounds; standing, sitting, bending, walking, 10+ hours per day; personal protective equipment including Steel-toed shoes, safety glasses, hearing protection, and wearing a respirator when required
• Select and install proper cutting tools, and zeroe in the machine to control. Shape and install proper cutting tools select proper tool offsets to meet quality standards and make other necessary setup adjustments
• Select and load proper CNC program in machine control to insure proper operation of the machine
• Inspect set up parts prior to submission to inspection for approval to the fullest and most
practical extent possible
• Investigate “out of specification” problems in machining processes and work with ME’s and programmers to resolve issues
• Provide technical support to Manufacturing personnel when necessary
• Set up CNC machines per blueprints or customer requirements
• Verify gages and inspection equipment required are correct and appropriate for the task
• Verify NC code during execution of setup
• Pre-set and install proper cutting tools select proper speeds, feeds, and depth of cut where applicable to maintain the proper quantity and quality standards
• Adhere to safety guidelines and the correct procedures for performing tasks to prevent personal injury or damage to product and/or equipment
• Support a flexible work schedule supporting overtime, off-Fridays, weekends, and/or alternate shifts to support product schedules as required
Basic Qualifications:
• 2 years, or equivalent experience/combined education, with additional specialized training in specific aspects of job functions and with demonstrated ability to meet production time standards with minimal defects
• Knowledge of basic shop math (metric conversion and arithmetic)
• Proficient in use of Measuring Equipment and able to verify conformance of machined work piece to specifications
• Proficient in reading and understanding complex mechanical blueprints
• Experience in selection and installation of proper cutting tools, and zeroing the machine to control.
• Experience in shaping and installing proper cutting tools and selecting proper tool offsets to meet quality standards and make other necessary setup adjustments
Desired Skills:
• Knowledge of M & G code to be able to edit & trouble shoot CNC program at machine
• Experience as CNC operator in multiple machine cellular manufacturing operation
• Experience with setups on both horizontal and vertical machines
• Experience pre-setting cutting tools and setting up fixtures in machines
• Proficient with editing CNC programs and using FANUC controls
• Experience working/machining steel, aluminum and stainless steel with knowledge of machining speeds and feeds required
• Proficient at GD&T
• Experience in set up and operation of one or more computer numerical controlled machining centers. Performing such operations as drilling, milling, boring, & tapping, etc. on any and all types of work within the scope of the machine
• Experience programming with GibbsCAM
• Experience with Solid Modeling
• Ability to perform complex calculations related to machining
• Knowledge of such tools as SAP, Command Media, Apriso, PAL, dPLM, FlexNet, Microsoft Office
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.

As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Experience Level: Hourly/Non-Exempt
Business Unit: MISSILES AND FIRE CONTROL
Relocation Available: No
Career Area: Manufacturing
Type: Full-Time
Shift: Second

• Knowledge of M & G code to be able to edit & trouble shoot CNC program at machine
• Experience as CNC operator in multiple machine cellular manufacturing operation
• Experience with setups on both horizontal and vertical machines
• Experience pre-setting cutting tools and setting up fixtures in machines
• Proficient with editing CNC programs and using FANUC controls
• Experience working/machining steel, aluminum and stainless steel with knowledge of machining speeds and feeds required
• Proficient at GD&T
• Experience in set up and operation of one or more computer numerical controlled machining centers. Performing such operations as drilling, milling, boring, & tapping, etc. on any and all types of work within the scope of the machine
• Experience programming with GibbsCAM
• Experience with Solid Modeling
• Ability to perform complex calculations related to machining
• Knowledge of such tools as SAP, Command Media, Apriso, PAL, dPLM, FlexNet, Microsoft Office

Job Ident #: 70653404992

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/

Lockheed Martin Corporation is an American global aerospace, defense, security and advanced technologies company with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It is headquartered in North...

Benefits:
TBD

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

Job Info

Location

Archbald, Pennsylvania, United States

Type

Permanent

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/