Description:Function Plan, perform, and direct coordinate measuring machine (CMM), Faro Arm or other electronic data collection equipment appropriate to the product, inspection operations on vendor and in house manufactured products and machined parts.Typical Responsibilities Follow general instru
JSfirm
CMM Inspector/Programmer A
Job Description:

Description:Function
 Plan, perform, and direct coordinate measuring machine (CMM), Faro Arm or other electronic data collection equipment appropriate to the product, inspection operations on vendor and in house manufactured products and machined parts.

Typical Responsibilities
 Follow general instructions, complex drawings, machine manuals, special instructions, and
standard inspection methods and procedures for selection of characteristics required for
computerized inspection programs.
 Write complex non-menu driven inspection programs from all available information including
two dimensional drawings, three-dimensional solid models and other source materials.
 Interpret 3-D solid models.
 Review product drawings for specifications, select starting points, sequence of operations,
write complex, non-menu-driven programs, and correlate with Manufacturing Engineering on
more difficult programs and any required validation.
 Make all necessary mathematical calculations, use coordinate measuring machines and
precision measuring equipment such as surface plate, rotary head, etc., to perform first piece
inspection on a variety of products and to verify three-dimensional-source programs for
inspection use.
 Perform NC tape and process verification inspections including tool and fixture proving.
 Perform 3D analysis of inspection data to CAD Master Data.
 Regularly advise and work with Manufacturing, Manufacturing Engineering, and vendor
representatives concerning discrepancies of parts/tools not meeting required specifications
and quality control standards.
 Finalize inspection results, maintain computer program file and complete all paperwork as
required.
 Enter e-NMRR’s into system.
 Direct and train seldom over 10 other inspectors or inspector/programmers on coordinate
measuring machine operations, associated inspection methods and procedures, and
resolution of any questionable deviations.
 Responsible for recognizing when coordinate measuring equipment is in need of repair and
for coordinating periodic maintenance.
 Perform operator checklist as required.
 Follow all rules and regulations pertaining to environmental health and safety.
 Contribute to the overall effectiveness of equipment by performing operator required upkeep.
 Segregate waste material and follow good housekeeping practices.
 Perform other related inspection duties as directed and refer only unusual or recurring
problems to Working Leader or Supervisor.
Basic Qualifications:
Requires a broad knowledge of inspection methods and procedures, layout methods and the use of coordinate measuring machine and associated precision equipment.

Ability to use advanced shop mathematics, including algebra, geometry and trigonometry and interpret complex part drawings and specifications. Also requires courses in CMM programming, and working knowledge of CAD systems and 3D modeling.

Equivalent to four years of technical training and specialized courses in multi-dimensional programming.

Over 5 years or equivalent Sikorsky experience.
Desired Skills:
• 5 to 8 Years of Programming experience, any language, at least 2 years Calypso.
• Demonstrated advanced knowledge of GD&T and drawing interpretations.
• Demonstrated advanced ability to program in at least 2 CMM programming languages utilizing high level tools such as conditional logic, looping, and variables.
• Demonstrated ability to understand complex 3,2,1 CMM programming alignments in Calypso.
• Demonstrated through understanding and ability to utilize iterative and bestfit part alignments in Calypso.
• Experience with software control best practices such as revision control and storage protections.
• Ability to develop basic automation scripts.
• Advanced knowledge of CMM components, operation, and maintenance.
• Advanced knowledge and experience with manual inspection gaging and setups.
• Thorough knowledge of 3d modeling software (Catia and 3DX).
• Effective strong communication skills, written, oral, listening, technical writing.
Proficient skill level with Microsoft Office applications: Word, Excel, PowerPoint, etc.
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Standard Monday to Friday 40 hour work week
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the worlds most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.

With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.

If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: RMS
Relocation Available: No
Career Area: QA/Test and Inspection
Type: Full-Time
Shift: First

• 5 to 8 Years of Programming experience, any language, at least 2 years Calypso.
• Demonstrated advanced knowledge of GD&T and drawing interpretations.
• Demonstrated advanced ability to program in at least 2 CMM programming languages utilizing high level tools such as conditional logic, looping, and variables.
• Demonstrated ability to understand complex 3,2,1 CMM programming alignments in Calypso.
• Demonstrated through understanding and ability to utilize iterative and bestfit part alignments in Calypso.
• Experience with software control best practices such as revision control and storage protections.
• Ability to develop basic automation scripts.
• Advanced knowledge of CMM components, operation, and maintenance.
• Advanced knowledge and experience with manual inspection gaging and setups.
• Thorough knowledge of 3d modeling software (Catia and 3DX).
• Effective strong communication skills, written, oral, listening, technical writing.
Proficient skill level with Microsoft Office applications: Word, Excel, PowerPoint, etc.
Company Details
Lockheed Martin
6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/
1731 Open Jobs Available
Lockheed Martin Corporation is an American global aerospace, defense, security and advanced technologies company with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It is headquartered in North...

Benefits:
TBD
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)
Job Info
Location
Stratford, Connecticut, United States
Type
Permanent
Company Details
Lockheed Martin
6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/
1731 Open Jobs Available
Lockheed Martin Corporation is an American global aerospace, defense, security and advanced technologies company with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It is headquartered in North...

Benefits:
TBD

JSfirm, LLC

Roanoke, TX

jobs@jsfirm.com

JSfirm LLC, Privacy Policy

All rights reserved. 2001-2024 JSfirm