Description:IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, VAFB or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position.OCCUPATIONAL SUMMARYThis occupation requires the complete set-up and op
JSfirm
Machinist General
Job Description:

Description:IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, VAFB or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position.

OCCUPATIONAL SUMMARY
This occupation requires the complete set-up and operation of the following precision and standard power machines: Duplicating, horizontal boring mill, jig borer, lathe, milling machine, planer and precision grinder; the planning, layout, machining and assembly to precision tolerances of parts and tools developed to meet research standards and specification.

WORK PERFORMED
Must be able to and normally does perform the following duties:
Set-up and operate above machine tools and metal fabricating machines, to completely and independently perform any operation within their capacity.

Layout, machine fabricate and assemble to exacting tolerances or extremely close dimensions, intricate precision parts and assemblies, sheet metal items and shop tooling devices, including small dies, jigs and fixtures incidental to work being performed.

Work from sketches or verbal instructions in fabricating and assembling completely to exacting tolerances small intricate assemblies, requiring extreme care to insure proper adjustments, clearances, alignments and coordination.

As required, perform hand and honing operations on surfaces, bores and pivots to finest tolerances and surface specifications.

As required, operate power-forming or cutting equipment in working and forming sheet metal stock to desired specifications and characteristics.

In addition to the above duties, perform the following representative duties:

Perform bench work finishing, assembling and fitting. Perform precision grinding operations on cutting tools and parts.

Work from complex detail blueprints, sketches, templates, master models or verbal instructions, and use precision-gauge instruments in projecting and laying out angular and linear dimensions.

Perform rework wherein the operations are essentially the same as required for the work described above.

TYPICAL MATERIALS, TOOLS AND EQUIPMENT USED

Materials worked on: Ferrous and non-ferrous metals and their alloys; non-metallic materials; new unproven materials.

Materials worked with: Layout dye, cerrobend, lubricants and cutting oils, solvents, screws, nuts, bolts, rivets, parts and accessories.

Tools used: Mechanics hand tools, precision measuring instruments, gauges, form blocks, templates, jigs and fixtures, levels, portable drills, and special fabricating metal fitting and assembly tools.

Equipment used: Precision and standard power machines and equipment such as:
Bench lathes, milling machines, surface grinders, jig borers, drill presses, power and hand saws, hydraulic jacks, sheet metal hand and power fabrication machines,
engraving machine and internal-external cylindrical grinder.
Basic Qualifications:
• Must possess a complete knowledge of machine shop theory, practice and procedure; advanced shop mathematics.
• Use precision measuring instruments to verify in-process hardware to required tolerances and dimensions.
• Have a good knowledge of sheet metal operations.
• Must be able to set-up completely and operate all basic types of machine tools, as required.
• Ability to apply a comprehensive knowledge of shop techniques necessary to work metals to required specifications without conventional tooling, when required.
• To read and interpret complex engineering blueprints and assembly drawings.
• To work from incomplete engineering verbal, written and sketch information.

• May be required to have proper classification of commercial drivers license required by the State of Florida to operate material handling equipment.

• Ability to obtain and maintain security clearance.
Desired Skills:
• Machinists and tool and die makers set up and operate equipment to produce precision metal parts, instruments, and tools

Working from engineering drawings developed by engineers lay out the design on the raw material (usually metal), then cut it to size and shape using manually controlled machine tools (such as lathes, milling machines, grinding machines, and jig grinders), power tools (such as die grinders and rotary tools), and hand tools (such as files and honing stones).
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Top Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 9x80 every other Friday off
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the worlds most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.

With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.

If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: SPACE
Relocation Available: No
Career Area: Craft Workers
Type: Full-Time
Shift: First

• Machinists and tool and die makers set up and operate equipment to produce precision metal parts, instruments, and tools

Working from engineering drawings developed by engineers lay out the design on the raw material (usually metal), then cut it to size and shape using manually controlled machine tools (such as lathes, milling machines, grinding machines, and jig grinders), power tools (such as die grinders and rotary tools), and hand tools (such as files and honing stones).
Company Details
Lockheed Martin
6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/
1731 Open Jobs Available
Lockheed Martin Corporation is an American global aerospace, defense, security and advanced technologies company with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It is headquartered in North...

Benefits:
TBD
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)
Job Info
Location
Cape Canaveral, Florida, United States
Type
Permanent
Company Details
Lockheed Martin
6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/
1731 Open Jobs Available
Lockheed Martin Corporation is an American global aerospace, defense, security and advanced technologies company with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It is headquartered in North...

Benefits:
TBD

JSfirm, LLC

Roanoke, TX

jobs@jsfirm.com

JSfirm LLC, Privacy Policy

All rights reserved. 2001-2024 JSfirm