Job Description:

This position serves as an Electronics Engineer within one of the multiple National Airway Systems Engineering (NASE) teams or sub-teams providing advanced engineering expertise in support of one or more NAS systems. Plans and accomplishes complex projects and other work activities under the limited direction of a manager, project/program manager, team leader, or more experienced engineer.

Duties

The incumbent performs multiple, varying, and complex assignments and plans the implementation of projects/programs under limited direction of a manager, project/program manager, or more experienced engineer. Provides engineering experience in support of the one or more assigned systems/programs within the FAAs National Airspace System (NAS). Provides guidance to lower-level staff on the resolution of difficult technical problems associated with continued operation of commissioned facilities and resolution of problems related to the introduction of new systems into the NAS. Makes recommendations to management regarding in-service improvements in the analysis, design, and implementation of system-wide hardware/firmware modifications; service life extension; failure analysis/support in response to NAS related problems beyond the assigned repair capability of the field, NAS configuration management; and quality assurance.

Applies experience and advanced knowledge of engineering principles, theories, and concepts applicable to electronic engineering to accomplish assignments and to develop plans and techniques to improve programs and policies. Understands how new NAS system deployments interact with or are affected by other disciplines and considers the objectives of the major subdivision and LOB/SO when developing, integrating, and implementing solutions to diverse, complex problems. Typical assignments may include system design and integration; extensive research; and shared responsibility for project/program management.

May conduct component tests and system level testing in a lab and on installed systems to verify vendor specification compliance and system performance. Analyzes and resolves a wide variety of user problems and system failures involving difficult technical problems of integrated electronics systems requiring high reliability and safety.

Defines, plans, and organizes assigned resources to accomplish organizational objectives. Allocates resources to accomplish small work-activities within established schedules.

Contacts are internal and external. May act as a key technical point of contact for assigned activities. Contributes to the preparation of management/technical reports or contractual documents, and may be called upon to communicate the overall results of a project or work activity to FAA management, the aviation and aerospace industries, and other external parties.

Established policies/procedures provide guidance for most assignments, but allow considerable discretion to select the most appropriate approach or to recommend new approaches. Assignments typically require solutions that are to be derived by interpreting and extrapolating from situations that were faced in the past. Provides recommendations to improve work processes.

Resolves most problems impacting system performance of facilities and systems. Informs management of problems that require their attention. Work is reviewed periodically, typically at major milestones and at completion, for technical compliance and alignment with the requirements of the project or other work activity.

Job Requirements:

Requirements Conditions of Employment

US Citizenship is required.
Selective Service Registration is required for males born after 12/31/1959.
Must submit an SF50 (See Required Documents).
Designated or Random Drug Testing required.
This position has a positive education requirement. Transcript(s) required.
A one-year probationary period may be required.
Successful completion of a security investigation may be required
Please review Required Documents & Additional Information.

Qualifications

Basic Requirements:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (transcripts required)

OR

B. Combination of education and experience - college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

Note: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise.

AND

IN ADDITION TO THE ABOVE BASIC REQUIREMENT:

To qualify at the FV-I (FG/GS 13) level, you must demonstrate in your application you possess one (1) year of Specialized Experience equivalent to the FV-H (FG/GS 11/12) level. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position.

SPECIALIZED EXPERIENCE includes: experience using Agile or Scaled Agile Framework for work/project management; experience collecting, compiling and analyzing data; experience identifying and recommending solutions for complex/difficult problems; communicate effectively to targeted audiences; collaborate work, paired work, and completing projects in a team setting; designing modifications to NAS systems including the development of all required artifacts including but not limited to for Safety Risk Management, National Change Proposals, Letters of Authorization, and System Support Modification Directives.

AND

Quality Ranking Factor (QRF): Well Qualified applicants will demonstrate the following within their resume:

1) Knowledge, skill, and ability to manage work using JIRA or other work flow management platform.

2) Knowledge, skill, and ability to identify process improvement needs and implement changes to workflow processes.

Applicants should provide examples of specialized experience in their work history. Qualifications must be met by the closing date of this vacancy announcement.

Education

This position has a positive education requirement: Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications. If selected, an official transcript will be required prior to appointment. You may upload these documents with your application in USAJOBS or fax it to fax number provided in the announcement (please include announcement number on each page).

Failure to do so will result in loss of consideration.

Schools must be accredited by an accrediting institution recognized by the U.S. Department of Education. Accreditation may be verified at the following website: www.ed.gov/accreditation.

Foreign education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered.

Information Regarding KSA's

As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the initial application in the hiring process for all announcements. Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA.

In lieu of providing a KSA narrative response in the text box listed below each KSA, in your work history, please include information that provides specific examples of how you meet the response level or answer you chose for each KSA. Your work history examples should be specific and clearly reflect the highest level of ability. Your KSA answers will be evaluated further to validate whether the level that you selected is appropriate based on the work history and experience you provided. Your answers may be adjusted by a HR Specialist as appropriate.

Eligible applicants meeting the minimum qualification requirements and selective factor(s), if applicable, may be further evaluated on the KSA listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories: score order, category grouping, or alphabetical and referred to the selecting official for consideration.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

IMPORTANT: Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s). All answers provided in the on-line process must be substantiated. Ensure that your application package/resume supports your responses.

Required Documents

Notification of Personnel Action (SF-50) will be required to verify area of consideration. Transcripts may be required (see below). Other supplemental documentation, etc. will be accepted in combination with your on-line application. These documents must be uploaded or emailed to 9-AMC-AHF-S210@faa.gov on or before the closing date of this announcement. All submitted documents should reference the announcement number.

This position has a positive education requirement; college transcripts are required for ALL candidates newly appointed to the FAA in the 0800 (Engineering) series.

College transcripts must be submitted from current FAA employees applying for internal vacancies if they have never held a position in the 0800 (Engineering) series with the FAA.

College transcripts are not required from current FAA employees who are currently occupying an 0800 (Engineering) series.

If selected, official transcripts are required prior to employment.

If you are an FAA employee, you MUST provide a copy of your SF-50 (Notification of Personnel Action) containing information in Blocks 15, 17, 18, 19, 22, and 24 so it can be used to verify your position title, series, grade, tenure, and organization of record by the closing date of the announcement. You may fax your SF-50 or upload it into the on-line application. If faxing the SF-50, please ensure you include the vacancy announcement number on the faxed copy.

If you are an FAA employee, you can access and print your SF-50 from the eOPF system https://eopf.opm.gov/dot/.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Job Ident #: 810060900

Apply Now

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)